Zhejiang Hangtong Machinery Manufacturing Co., LTD. New annual output of 1 million automobile wheel production line project completion of environmental protection facilities acceptance announcement according to environmental management are [...]
Zhejiang Hangtong Machinery Manufacturing Co., LTD. New annual output100Ten thousand automobile wheel production line project
Public announcement on acceptance of completed environmental protection facilities
According to the relevant requirements of environmental management, Zhejiang Hangtong Machinery Manufacturing Co., LTD., a new annual output of 1 million automobile wheel production line project has been completed environmental protection facilities acceptance monitoring work, the project acceptance is now publicized。During the publicity period, if you have questions about the pollution of the project, or think that the construction of the project may have a significant impact on your work, production and living environment, please reflect to our unit by telephone, letter or other means during the publicity period, and submit written comments。
① Publicity period: December 21, 2018 to January 22, 2019
② Contact number during the publicity period: 13957699933/ Junyu Jiang
③ Mailing address: Xianju County Yongan Industrial cluster (Fengxi East Road No. 2) Zip code: 317306
④ Email: 819530162@qq.com
I. Basic information of the project
Project name: New production line with an annual output of 1 million automobile wheels
Construction unit: Zhejiang Hangtong Machinery Manufacturing Co., LTD
Construction location: Xianju County Yongan industrial cluster
Project Overview: Zhejiang Hangtong Machinery Manufacturing Co., Ltd. is located in Yongan Industrial agglomeration area, Xianju County. It is a new project. The main products are automobile wheels, and the production capacity can reach 1 million automobile wheels per year。The total investment of the project is 50 million yuan, the total land area is 14,883 square meters, and the building covers an area of 7,370.48 square meters, canteen, on-duty dormitory, 2 production workshops, a diesel storage tank and supporting environmental protection facilities。The project purchased 2 painting production equipment and 1 electrophoresis line。
2013年2月，Zhejiang Hangtong Machinery Manufacturing Co., Ltd. commissioned Taizhou Environmental Science Design and Research Institute to prepare "Zhejiang Hangtong Machinery Manufacturing Co., Ltd. to build a new annual output of 1 million automobile wheel production line project Environmental impact report (draft for approval)";June 18, 2013，Hangtong company obtained Xianju County Environmental Protection Bureau approval，Reply to the Environmental Impact Report of Zhejiang Hangtong Machinery Manufacturing Co., LTD. 's New production line with an annual output of 1 million automobile wheels，The approval number is Xian Huan Jian [2013]36。
The project starts in March 2013, completes in August 2018, and debugs and runs from August to October 2018。The project received 1 environmental complaint from the project to the commissioning process, and the punishment has been completed。
Acceptance monitoring unit: Taizhou Lvke Testing Technology Co., LTD
2. Implementation of environmental protection
The enterprise commissioned Taizhou Environmental Science Design and Research Institute to prepare the Environmental Impact Report of Zhejiang Hangtong Machinery Manufacturing Co., LTD. 's new annual output of 1 million automobile wheel production line.，And obtained Xianju County Environmental Protection Bureau approval (approval number: Xian Huanjian [2013]36)，The wastewater and waste gas treatment project of this project is designed by Taizhou Huanmei Environmental Protection Engineering Technology Co., LTD，In August 2018, the company completed the construction of the main engineering facilities and their supporting environmental protection facilities，In September of the same year, it entered the trial production and commissioning stage，期间，Taizhou Lvke Testing Technology Co., Ltd. was commissioned to conduct acceptance monitoring and report preparation。
3. Acceptance and monitoring results
1.废水
During the monitoring period, the pH value range of the standard outlet of the waste water station of Hangtong Company is 7.91~8.97, the maximum daily mean value of each pollutant was 308mg/L chemical oxygen demand and 0 ammonia nitrogen, respectively.72mg/L, total phosphorus 0.05mg/L, petroleum 5.18mg/L, anionic surfactant 0.05mg/L, zinc < 0.023mg/L, iron 0.55mg/L, suspended matter 21.5mg/L, 5 days BOD 63.3mg/L, chloride 175.5mg/L。The pH value of domestic wastewater discharge outlet is 6.61~7.46. The maximum daily mean value of each pollutant was chemical oxygen demand 16.25mg/L, 5 days BOD 0.594mg/L, ammonia nitrogen 6.65mg/L。
All the pollutants in the standard outlet of the waste water station and the discharge outlet of domestic waste water of Hangtong Company meet the requirements of the management standard of the sewage treatment plant。
2.废气
1) Organized exhaust gas
During the monitoring period, the two-day maximum average emission concentration of non-methane total hydrocarbon at the discharge port of the spray painting waste gas treatment facility was 30.6mg/m3(Maximum emission rate 0.19kg/h), ethyl acetate was 8.9mg/m3Butyl acetate was 7.31mg/m3The maximum odor emission concentration is 1318 (dimensionless);The two-day maximum average emission concentration of welding exhaust gas particulate matter < 20mg/m3The maximum two-day average emission concentration of non-methane hydrocarbon at the exhaust gas discharge port is 9.26mg/m3(Maximum emission rate 1.17×10-2kg/h);The two-day maximum average emission concentration of nitrogen oxides at the discharge port of the furnace exhaust gas treatment facility is 161mg/m3The concentration of particulate matter is below the detection limit (< 20mg/m)3), the maximum average emission concentration of sulfur dioxide after conversion is 74.5mg/m3, smoke blackness (level) < I。
Compare the emission limits of each pollutant，The pollutants in the discharge ports of spray painting exhaust gas treatment facilities and welding exhaust gas discharge ports meet the Comprehensive Emission Standards of Air Pollutants (GB16297-1996).，The maximum average emission concentrations of ethyl acetate and butyl acetate meet ring function [2003] No. 363 and GBZ2, respectively.1-2007 related requirements;The maximum odor monitoring value meets the requirements of "Odor Pollutant Emission Standard" (GB14554-93);The maximum average emission concentration and emission rate of total non-methane hydrocarbons at the exhaust outlet of electrophoresis exhaust gas meet the relevant standards of the Comprehensive Emission Standard for Air Pollutants (GB16297-1996).The maximum average emission concentration of particulate matter, sulfur dioxide and smoke blackness (grade) at the discharge port of furnace exhaust gas treatment facilities meets the secondary standard limits of drying furnaces and kilns in the "Industrial Furnace Air Pollutant Emission Standard" (GB9078-1996)，The maximum average emission concentration of nitrogen oxides meets the limit (200mg/L) of gas-fired boilers in the Boiler Emission Standard for Air Pollutants (GB13271-2014).。
2) Unorganized exhaust gas
During the monitoring period, the maximum concentration value of each pollutant in the factory boundary of Hangtong Company is: total suspended particulate matter 0.533mg/m3, ethyl acetate < 0.015 mg/m3Butyl acetate < 0.015 mg/m3, non-methane total hydrocarbon 1.07 mg/m3Odor concentration (dimensionless) 15。
Control emission limit，The concentration of particulate matter and total non-methane hydrocarbon in Hangtong's factory boundary meets the concentration limit of unorganized emission monitoring in the Comprehensive Emission Standard for Air Pollutants (GB16297-1996);The plant boundary concentrations of ethyl acetate and butyl acetate met the emission environmental target value (DMEG).All the concentrations in the odor factory are in line with the requirements of the "Odor Pollutant Emission Standard" (GB14554-93)。
3.Plant boundary noise
During the monitoring period, the daytime factory boundary noise value range of ATC is 52.2~64.8dB (A), meet the "Industrial enterprise boundary environmental noise emission Standard" (GB12348-2008) class 3 standards。
4.Solid waste
The company has a hazardous waste dump in the northeast corner of the factory, with an area of about 23m2（9.8m×2.36m), storage of paint slag, sludge, waste paint buckets, waste activated carbon, etc., the yard is low in the middle, high on both sides, and has an exudate collection pool inside, the ground and wall apron are painted with anti-corrosion paint for anti-corrosion treatment, and the door is stuck with dangerous solid waste signs and warning boards。The hazardous waste disposal Agreement will actually terminate on December 31, 2018, and the agreement shall be supplemented after expiration。See attached photo for related photos。
To the southeast of the hazardous waste yard, there is a general solid waste yard with an area of about 23m2（9.2m×2.5m), machining scraps and waste welding slag sale treatment, regular cleaning;Kiln ash is transported by nearby farmers to be used as farm fertilizer;The domestic waste generated is cleared daily by the sanitation department。
In summary, the storage, transfer and disposal of solid waste of Hangtong Company basically meet the requirements of environmental protection。
5.Total pollutant discharge
According to the EIA, after the implementation of the project, the total amount of pollutants under control is as follows: The total amount of wastewater discharge is 10135.7t/a, COD0.61t/a, ammonia nitrogen 0.081t/a。According to the investigation and analysis, when the project reaches production, the annual discharge of wastewater is 10062t/a and the CODcr is 0.3t/a, ammonia nitrogen is 0.015t/a, in line with the total volume control requirements in the EIA and approval。
According to the requirements of EIA, the project is 0.36t/a, nitrogen oxide 0.37t/a, the total nitrogen oxide of this project needs to be reduced by regional substitution, and the reduction ratio is 1:1, that is, after the implementation of this project, the regional substitution reduction of sulfur dioxide and nitrogen oxide will be 0.36t/a、0.37t/a, the total amount needs to be applied for paid use to Taizhou sewage rights Reserve Center。According to the monitoring data, the average emission rate of sulfur dioxide and nitrogen oxide during the monitoring period of this project is 0.03kg/h, 0.42kg/h, according to the operation of the enterprise furnace, the average daily operation time is about 3 hours, the annual operation time of the furnace is 900h, and the annual emission of sulfur dioxide and nitrogen oxides is 0.027t/a、0.37t/a, in line with the EIA total volume control requirements。
Zhejiang Hangtong Machinery Manufacturing Co., LTD
December 21, 2018
Zhejiang Hangtong Machinery Manufacturing Co., Ltd. is a set of technology, industry, trade in one, professional research, development, manufacturing, sales of all kinds of automobile wheels industrial company。The company is located in Yongan Industrial zone, Xianju County, Zhejiang Province with beautiful environment, one hour away from Taizhou Airport and Jiaojiang Container Terminal, 40 kilometers away from Ningbo, Taiwan and Wenzhou Railway Linhai Station, and next to the east exit of Xianju on Tai-Jin Expressway, the sea, land and air transportation is very convenient。
